COMPONENTS / FLAT STEEL
FLAT STEEL STOCK
Flat steel bars.
Flat steel for forks, springs, moulds, automotive frames and bearing-related manufacturing.
Enquire about supply →
Conceptual supplied form · not to scale
Fork Flat Bars
Flat steel stock for forklift fork manufacturing. Specify the required grade, section and delivery condition for your production process.
Section range
Thickness 20–110 mm
Width 70–320 mm
Reference grades
Supply stage
Flat steel stock.
Length and condition to order.
Spring Flat Bars
Flat steel stock for spring manufacturing. State the specified grade, section and condition required before forming and heat treatment.
Mould Flat Bars
Flat steel stock for mould-related machining. Send the drawing or specified material, section and machining allowance for quotation.
Automotive Frame Flat Bars
Flat steel stock for automotive frame applications. Specify the grade and section required by the component drawing.
Bearing Flat Bars
GCr15 flat steel stock for bearing-related manufacturing. Send the required section, length and delivery condition for quotation.
Section range
Thickness By enquiry
Width By enquiry
Reference grades
Supply stage
Flat steel stock.
Length and condition to order.
Other Flat Bars
Additional flat steel options in GCr15 and 100D. Send the intended use, grade and dimensions to define the supply requirement.
Grades are separate references, not automatic equivalents. Section combinations and delivery condition are confirmed for the order.
Specify for your next process.
JOTAIN coordinates mill supply for your requirements. Mill, delivery condition, inspection and documents are confirmed during enquiry.
Related supply & material records.
40Cr round bar
Need round stock? Review annealed or quenched-and-tempered supply separately.
View round-bar route →
40Cr material record
Chemistry, tensile and impact results, hardness and UT/MT status. This example is not a flat-bar batch report.
View sample record →
Confirm tolerances, surface, inspection and certification for your order. The illustration shows supplied form, not an actual batch or finish.
Technical details, inspection and quotation requirements
Flat Steel Bars
For the components you make.
Explore flat steel for forks, springs, moulds, automotive frames and bearing-related manufacturing. Start with your component, then specify the grade and section you need.
Send your requirementsFind Your Flat Bar
Six product families. Choose by what you manufacture.
Flat steel stock for forklift fork manufacturing. Specify the required grade, section and delivery condition for your production process.
Supply Range
- Reference grades
- 40Cr33MnCrTiB15B371537HC34MnCrNiMo
- Thickness
- 20–110 mm
- Width
- 70–320 mm
Flat steel stock for mould-related machining. Send the drawing or specified material, section and machining allowance for quotation.
Flat steel stock for automotive frame applications. Specify the grade and section required by the component drawing.
GCr15 flat steel stock for bearing-related manufacturing. Send the required section, length and delivery condition for quotation.
Additional flat steel options in GCr15 and 100D. Send the intended use, grade and dimensions to define the supply requirement.
Send your application, grade, section, length and quantity.
Open flat-bar enquiry →Discuss your project
Send your requirements directly to JOTAIN. We will reply to your email.